Zhongshan ALLMAY Tech Lighting Co., Ltd.
Model No.: AM-RS-04
Type: Microwave Sensor Switch
Certification: CE, RoHS
Microwave Frequency: 5.8Ghz
Load: Max 35w
Standy Power: <0.5w
Time Delay: 18-25s Adjustable
Working Voltage: 185-265VAC / 110VAC
Sensing Distance: 6-8m (adjustable)
Photo/Daylight Sensing: < 10 Lux
Working Temperature: -20°C ~ +65°C
Packaging: 100-500pcs/carton box.
Place of Origin: CHINA
Supply Ability: 10000000PCS/WEEK
Ceiling Mounted Microwave Presence Detector can be wall or ceiling mounted and is designed for the automatic switching of lighting. The sensor detects movement within its range of detection by emitting low power microwave signals and measuring the reflections as people moving through a room. When movement is detected, the load switches on, if no more movement is detected within a certain time, The sensor switch will switch the load off.
Stable and long working hours, to adapt to a wide range of tempeture and induction covering a large area
Radar scan signal issued by the sensors can penetrate wooden doors, glass and a thin wall ( installation can be concealed for anti-theft searchlight)
Can achieve accurate delay lights people, people from the lights out. Widely used in recessed light fixtures and staircarse, corridors, channel, patio. warehouse.bathroom, toilet, basement, parking lot etc.
2.Working Voltage: 185V-265V AC / 50Hz
3.Microwave Frequency: 5.8GHz
4.Load:35W (Incandescent Lamp,Fluorescent Lamp)
5.Standby power:<0.5 W
6.Working Temperature: -20° ~ +65°C
7.Sensing Distance: 6~8m
8.Time Delay: 18-25s adjustable
9.Photo sensing: <10lux
10.Microwave Emission: < 10mW
11.Coverage: 360° (depends on fitting and surrounding)